What is EIGRP ? Explained with Example

By | 9th November 2015

What is EIGRP?

EIGRP is a Cisco proprietary routing protocol loosely based on their original IGRP (Interior Routing Protocol). EIGRP is an advanced distance-vector routing protocol, it  can only use it in an all-Cisco network, but EIGRP more than makes up for this deficiency by being easy to configure, fast, and reliable.

Like RIP, EIGRP is based on a distance vector algorithm that determines the best path to a destination. But EIGRP uses a more complex metric than RIP’s simple hop count. The EIGRP metric is based on the minimum bandwidth and net delay along each possible path, which means that EIGRP can accommodate larger networks than RIP.

 Cisco included so many useful features such as automatic two-way redistribution that make the migration from IGRP to EIGRP relatively straightforward.




EIGRP operates very efficiently over large networks. It achieves this efficiency in part by sending non-periodic updates. This means that, unlike RIP, EIGRP only distributes information about routes that have changed, and only when there is a change to report. The rest of the time, routers only exchange small “Hello” packets to verify that routing peers are still available. So, in a relatively stable network, EIGRP uses very little bandwidth. This is especially useful in WAN configurations.

It is also extremely efficient over LAN portions of a network. On each network segment, routers exchange routing information using multicast packets, which helps to limit bandwidth usage on segments that hold many routers.

Every router in an EIGRP network includes a topology table, which is a central feature of the DUAL algorithm. Every time a router receives a new piece of routing information from one of its neighbors, it updates the topology table. This helps to give it a reliable and up-to-date image of all of the connections in the network that are currently in use. Every destination subnet known to EIGRP appears in the topology table.

EIGRP includes many of the features such as Classless Inter-Domain Routing (CIDR) and Variable Length Subnet Masks (VLSM) that are needed in larger networks.

  How to Configure EIGRP

 Open Shortest Path First (OSPF)




How to Configure RIP v2

How to Configure Static Routes

How to Configure Default Routes

How to Configure OSPF

Border Gateway Protocol – BGP

Leave a Reply

Your email address will not be published. Required fields are marked *